A Prospecting Mineralogy Study: Arsenopyrite In Endogenetic Gold Deposits     

《东北亚地学研究》2001,(2)

  相似文献   

桂西古侵蚀沉积间断面型金矿床(续载)     

陈开礼 《南方国土资源》2001,14(1):37-40

古侵蚀沉积间断面型金矿是桂西的主要金矿床类型。文章着重分析该类型金矿成矿地质条件 ,论述矿床成因及成矿机理 ,认为此类型金矿易采易冶 ,经济效益显著 ,建议加大开发力度。  相似文献   

黄金的成色     

刘儒 《吉林地质》1994,13(3):81-83,45

黄金的成色并不是一成不变的，它成色的高低是与成矿温度、成矿阶段、深度、时代、变质程度、水溶液及风化作用等有一定关系，我们从这些关系中可以寻找到我们找矿的捷径和依据。  相似文献   

柿竹园矿床大理岩型锡矿石工艺矿物学研究   总被引：1，自引：0，他引：1  

谭延松 《湖南地质》1991,10(3):223-228

大理岩型锡矿石产于燕山早、中期千里山花岗岩与中、上泥盆统灰岩的外接触带。矿石呈细脉、网脉浸染状,锡矿物有:锡石、黄锡矿,富钛尼日利亚石、尼日利亚石和木锡矿,脉石矿物绿帘石、石榴石、电气石、萤石、方解石及磁黄铁矿等亦含锡,锡主要呈锡的浊立矿物存在,占总锡量的89.78％,其中锡石锡占总锡量的80.01％,其次有呈类质同象形式存在的锡,在绿帘石、石榴石、电气石等矿物中以Sn~(4+)取代Fe~(3+),这类锡占总量的8.33％。工艺矿物学研究表明,该类锡矿石以“贫”、“细”、“杂”为特征。锡不仅十分分散,而且品位偏低,矿石矿物组合及镶嵌关系复杂、相互包裹,紧密连生;锡矿物粒度微细,粒径一般为0.2～0.01mm,部分为<0.0l～0.002mm,是一种难选的锡矿石类型。通过锡的回收试验,采用选冶联合工艺流程,预测锡的最佳回收率可达50％以上。  相似文献   

中国北西部金矿主要类型,分布规律和成矿带划分     

程明高 《铀矿地质》1991,7(6):321-327,344

本文较系统地总结了我国北西部金矿主要类型、矿化特征和金矿时空分布规律,在此基础上划分出4个成矿区、12条成矿带、32条成矿亚带,从而指明了找矿方向,为贯彻“以铀为主,综合找矿,多种经营,搞活地质”的方针,提供了较好的参考资料。  相似文献   

Alluvial architecture of the Holocene Rhine–Meuse delta (the Netherlands)     

MARC J.P. GOUW 《Sedimentology》2008,55(5):1487-1516

Ancient fluvial successions often act as hydrocarbon reservoirs. Sub‐surface data on the alluvial architecture of fluvial successions are often incomplete and modelling is performed to reconstruct the stratigraphy. However, all alluvial architecture models suffer from the scarcity of field data to test and calibrate them. The purposes of this study were to quantify the alluvial architecture of the Holocene Rhine–Meuse delta (the Netherlands) and to determine spatio‐temporal trends in the architecture. Five north–south orientated cross‐sections, perpendicular to the general flow direction, were compiled for the fluvial‐dominated part of the delta. These sections were used to calculate the width/thickness ratios of fluvial sandbodies (SBW/SBT) and the proportions of channel‐belt deposits (CDP), clastic overbank deposits (ODP) and organic material (OP) in the succession. Furthermore, the connectedness ratio (CR) between channel belts was calculated for each cross‐section. Distinct spatial and temporal trends in the alluvial architecture were found. SBW/SBT ratios decrease by a factor of ca 4 in a downstream direction. CDP decreases from ca 0·7 (upstream) to ca 0·3 (downstream). OP increases from less than 0·05 in the upstream part of the delta to more than 0·25 in the downstream delta. ODP is approximately constant (0·4). CR is ca 0·25 upstream, which is approximately two times larger than in the downstream part of the delta. Furthermore, CDP in the downstream Rhine–Meuse delta increases after 3000 cal yr BP. These trends are attributed to variations in available accommodation space, floodplain geometry and channel‐belt size. For instance, channel belts tend to narrow in a downstream direction, which reduces SBW/SBT, CDP and CR. Tectonics cause local deviations in the general architectural trends. In addition, the positive correlation between avulsion frequency and the ratio of local to regional aggradation rate probably influenced alluvial architecture in the Rhine–Meuse delta. The Rhine–Meuse data set can be a great resource when developing more sophisticated models for alluvial architecture simulation, which eventually could lead to better characterizations of hydrocarbon reservoirs. To aid such usage of the Rhine–Meuse data set, constraints for relevant parameters are provided at the end of the paper.  相似文献   

Carbonate aeolianites of western Saurashtra,India: experimental decipherment of the depositional mechanisms     

PRABIR DASGUPTA  SUBIKASH BANDYOPADHYAY 《Sedimentology》2008,55(5):1361-1374

Granular carbonate deposits of Late Pleistocene to Early Holocene age, commonly referred to as ‘miliolite limestone’, occur in a linear belt, parallel to the southern coast of Saurashtra, India. In the present study area these carbonate deposits are found in select valleys between ridges and mounds of pyroclastic material present in the Deccan trap plateau. Two different depositional histories have been proposed for these sediments. The presence of marine bioclasts led to the postulation of a marine origin for these deposits. The second school of thought propounded redeposition of the coastal sediments by aeolian processes. Although a few features could not be explained by the proposed aeolian model, critical comparison of these two views favoured the aeolian origin. The mode of occurrence, lithological and structural attributes, and microscopic evidence presented here, also support a possible aeolian origin for these deposits. Experimental observation indicates that these carbonate aeolianites represent backflow deposits, which accumulated because of the flow separation caused by the presence of topographic highs. The conspicuous concave‐up geometry of the deposit conformed to the shape of the separation bulb. In view of the inferred depositional mechanism, the disposition of the deposits and the signature of the palaeoflow direction suggest that the carbonate particles were derived from the north‐western coast of Saurashtra by strong south‐easterly winds. Massive granular carbonates with outsized basement clasts appear to be the product of avalanching of granular material from the higher contours because of oversteepening of the primary deposit.  相似文献   

Source mechanism of mining induced seismic events — Resolution of double couple and non double couple models     

Jan &#x;ílený  Alexander Milev 《Tectonophysics》2008,456(1-2):3

  相似文献   

Anhydrite pseudomorphs and the origin of stratiform Cu–Co ores in the Katangan Copperbelt (Democratic Republic of Congo)   总被引：1，自引：1，他引：0  

Ph. Muchez  P. Vanderhaeghen  H. El Desouky  J. Schneider  A. Boyce  S. Dewaele  J. Cailteux 《Mineralium Deposita》2008,43(5):575-589

The stratiform Cu–Co ore mineralisation in the Katangan Copperbelt consists of dispersed sulphides and sulphides in nodules and lenses, which are often pseudomorphs after evaporites. Two types of pseudomorphs can be distinguished in the nodules and lenses. In type 1 examples, dolomite precipitated first and was subsequently replaced by Cu–Co sulphides and authigenic quartz, whereas in type 2 examples, authigenic quartz and Cu–Co sulphides precipitated prior to dolomite and are coarse-grained. The sulphur isotopic composition of the copper–cobalt sulphides in the type 1 pseudomorphs is between −10.3 and 3.1‰ relative to the Vienna Canyon Diablo Troilite, indicating that the sulphide component was derived from bacterial sulphate reduction (BSR). The generation of during this process caused the precipitation and replacement of anhydrite by dolomite. A second product of BSR is the generation of H₂S, resulting in the precipitation of Cu–Co sulphides from the mineralising fluids. Initial sulphide precipitation occurred along the rim of the pseudomorphs and continued towards the core. Precipitation of authigenic quartz was most likely induced by a pH decrease during sulphide precipitation. Fluid inclusion data from quartz indicate the presence of a high-salinity (8–18 eq. wt.% NaCl) fluid, possibly derived from evaporated seawater which migrated through the deep subsurface. ⁸⁷Sr/⁸⁶Sr ratios of dolomite in type 1 nodules range between 0.71012 and 0.73576, significantly more radiogenic than the strontium isotopic composition of Neoproterozoic marine carbonates (⁸⁷Sr/⁸⁶Sr = 0.7056–0.7087). This suggests intense interaction with siliciclastic sedimentary rocks and/or the granitic basement. The low carbon isotopic composition of the dolomite in the pseudomorphs (−7.02 and −9.93‰ relative to the Vienna Pee Dee Belemnite, V-PDB) compared to the host rock dolomite (−4.90 and +1.31‰ V-PDB) resulted from the oxidation of organic matter during BSR.  相似文献   

Mapping Proterozoic unconformity-related uranium deposits in the Rockhole area, Northern Territory, Australia using landsat ETM+     

H.M. Rajesh   《Ore Geology Reviews》2008,33(3-4):382-396

The Rockhole area, Northern Territory, Australia, hosts a number of Proterozoic unconformity-related uranium deposits. The geology of the area features within Paleoproterozoic rocks of the Pine Creek Orogen, near the unconformity with overlying platform cover sandstone of the Paleo- to Mesoproterozoic McArthur Basin. Landsat Enhanced Thematic Mapper plus (ETM+) data was used in the Rockhole area to assist in mapping geological structures and lithology, and to identify anomalous concentrations of ferrous minerals, the product of alteration, which can be indicators of buried uranium mineralization. Several image-processing procedures were applied to the ETM+ data to identify, isolate and enhance mineralogical information as simple and complex false color composites. ETM+ 754 shown as red green and blue respectively was the best simple image. Overall, complex images based on Principal Component Analysis proved to be the most useful products. Sandstone, shale and siltstone, the target lithologies, Koolpin Formation, the target stratigraphic unit, and bleaching pattern due to the removal of iron(II) compounds, the target alteration pattern, were confidently mapped to provide information required by the mineral emplacement model, which ultimately identified areas of likely uranium mineralization. Thus the contrasting behavior of the two principle oxidation states of uranium and iron can be utilized to map/delineate bleached alteration zones associated with economic concentrations of uranium using multispectral sensors like Landsat or better hyperspectral sensors.  相似文献